wiki:SoftWare
Warning: Can't synchronize with repository "(default)" (Unsupported version control system "svn": No module named svn). Look in the Trac log for more information.

Version 5 (modified by tracdaniel, 14 months ago) (diff)

--

Software

Python scripts

Cube-plugin

Master config file example:

#
# Configuration file for CCube - used with master-script
# version 0.1 - Tue Mar 8 11:40:53 CET 2016
# author: Matthias Ohrnberger, mao@geo.uni-potsdam.de
#
#############################################################
# CUBE acquisition parameters section
# we may think of "ACTION GET/SET" parameter .... (?)
DIGITIZER-ID AAC
DIGITIZER-VERS 1
# may be 1 or 2 ... (different config files)
S_RATE 100 # one of 50, 100, 200, 400
P_AMPL 1
# one of 1, 2, 4, 8, 16, 32, 64
E_NAME MAMBA
# GPS_ON is going to be set to one (1) ALWAYS! not selectable
# rest of CUBE^3 configuration file is pre-set with fixed values
#############################################################
#############################################################
# seedlink / cube_plugin parameters
# parameters needed to setup up cube_plugin and seedlink
NETWORK yy
STATION ABCDE # check whether it may be 5 characters... (?)
# LOCATION 00 # not yet compatibel with plugin
STREAM HH
SATELLITES 3 # minimum number of satellites needed
#############################################################
#############################################################
# Communication settings - specification of operation for
# all network devices: eth0 / wlan0 and usb0
ETHERMODE 2 # one of 0, 1, 2 - add as u need ...
ETHERIP 192.168.0.100 # derived from device eeprom
WLANMODE 0 # one of 0, 1, 2 - add as u need ...
WLANIP 172.16.0.100 # derived from device eeprom
WLANCHAN 1 # one of 1, 6, 12
UMTSMODE 0 # one of 0, 1, 2, 3, 4 -->
# 0G means OFF, 1G means AUTO, 2G, 3G, 4G
UMTSAPN internet.t-d1.de #
SIMPIN xxxx # pin in fulltext!
#############################################################
#############################################################
# VPN settings - config for device tun0
43
# /etc/openvpn/client.conf
# NOTE: please fill VPNREMOTE variable even if you don’t
# want to use openvpn - it is needed for not breaking the
# general configure script!
VPNPROTO udp
VPNREMOTE 141.89.111.92 1194
#############################################################

Setup VPN

https://wiki.ubuntuusers.de/OpenVPN/ (German) https://help.ubuntu.com/lts/serverguide/openvpn.html (English)